The short answer
Adding a key means programming an extra key while one already works. The car is happy, you can often read what you need from the working key, and on many vehicles it's a quick job over the OBD port.
All keys lost (AKL) means the owner has no working key at all. There's nothing to copy, so you have to get into the immobilizer another way, cut a blade from scratch, and sometimes take a module out of the car. It's more work, more risk and, priced properly, a better ticket.
Why all keys lost takes longer
- No blade to copy. You cut from a key code or decode the lock with a Lishi. Lishi tools pay for themselves fast: a Ford key code can cost about $30, while the Lishis for common Fords run about $180 total and work on every car after.
- The PIN is harder to get. Many vehicles need a PIN code to program keys. Sometimes your programmer reads it in seconds. Sometimes it comes from NASTF or a third party, and on some brands three wrong PINs lock you out for an hour.
- No cloning. Cloning copies an existing chip onto a universal chip, so the car accepts it without programming. It needs a working original key, so it's an add-key shortcut, not an AKL one.
- The bench comes into play. Some systems that are fine over OBD for an add-key need the module on the bench for AKL. BMW CAS3++ and newer, for example, need the ISN, which comes from the working key when adding, or from the engine computer on the bench when all keys are lost.
Check before you quote
For any AKL job, check at least three sources and look for agreement: your programmer's coverage list (Autel, for example, shows whether add-key and AKL go by OBD or need the bench), the reference books, and what other techs report on that exact year, make and model. Then check the problem-vehicle list. Some cars brick with the wrong tool or procedure, and a bricked module costs more than the job pays.
- Confirm the immobilizer system, not just the year. On European cars the chassis code matters.
- Put a quality voltage stabilizer on the car before you start. Low voltage mid-write is the classic way to kill a module.
- Back up the module data whenever your tool offers it.
- Verify proof of ownership. Every time, and especially when there's no key.
How to quote each one
Price on the value you deliver, not on the cheapest competitor. For an all-keys-lost job, the alternative is usually a tow, a dealer booking and days without the car. Same-day service with no tow is worth a premium. Add-a-key is faster and a good door-opener for repeat business, especially with fleets and dealers. We go deeper in how to price car key programming.
Learn the full procedures
The Northkey Academy online key programming course covers add-a-key and all-keys-lost procedures on domestic, Asian and European cars, with real job videos where the PIN won't pull and the tool fails, and what we did next.