Launch saleThe online course is $297 until January 15, 2027. Enroll now

Home / Online course

Northkey Academy: Key Programming

Cut it. Program it. Send it home.

The online course for shops that want to handle car keys in-house. Blades, transponders, remotes, EEPROM work and European immobilizers, taught from real jobs in a working bay.

A key module circuit board held in a bench fixture with heat tape over the chips
13Modules, in the order you'll use them
69Lessons, each with a quiz
10+Real jobs filmed start to finish
LifetimeAccess, including new lessons

What you'll be able to do

By the end of the course, a tech in your shop can take a key job from the phone call to the car driving away.

  • Identify the systemRead the vehicle and tell which transponder, blade and remote it uses.
  • Cut keys three waysFrom a key code, by decoding the lock with a Lishi, or from an existing key.
  • Add a keyProgram a spare when the customer still has a working key.
  • Handle all keys lostGet a car running again when there's no key at all.
  • Program and service remotesMatch FCC IDs and frequencies, and swap shells and batteries.
  • Read an EEPROM on the benchKnow when a module has to come out and how to do it safely.
  • Work on European carsBMW EWS to BDC2, Mercedes FBS1 to FBS4, VW and Audi IMMO 1 to MLB.
  • Price and run key jobsLicensing, insurance, suppliers, inventory and what to charge.

Curriculum

Every module and lesson

Open any module to see its lessons. Watch them in order the first time, then come back to a single lesson when that car rolls in.

A flip key opened up, with the glass transponder chip and the key blade beside it
A flip key opened up: shell, blade and the transponder chip.
Three HU101 key blades with different cut depths
HU101 blades, 7-cut and 10-cut.
Four Nissan key blades laid out on a wooden bench
Blade profiles from Module 3.
  1. 01Starting your journey5 lessons
    • Welcome to the course
    • How the course is laid out
    • Common questions from new locksmiths
    • Liability, risk and proof of ownership
    • Habits of a good automotive locksmith
  2. 02Terminology, tools and equipment6 lessons
    • Basic key terms
    • Advanced key terms
    • Types of keys
    • Parts of a key
    • Vehicle parts, modules and systems
    • Equipment, tools and supplies
  3. 03Key blades7 lessons
    • Key blade information
    • Understanding key cuts
    • Key codes
    • Decoding locks and keys
    • Hands-on: picking and reading with a Lishi
    • Cutting keys
    • Key cutting essentials
  4. 04Transponders3 lessons
    • Transponder types
    • Programming transponders
    • Renewing locked keys
  5. 05Remotes4 lessons
    • Remotes, frequencies and FCC IDs
    • Remote programming methods
    • Generating and universal remotes
    • Servicing remotes and batteries
  6. 06General key info4 lessons
    • Key acronyms
    • Brands of keys
    • Building keys
    • Breaking down part numbers
  7. 07EEPROM and soldering3 lessons
    • Soldering equipment and supplies
    • Why EEPROM research comes first
    • EEPROM servicing strategies
  8. 08BMW5 lessons
    • Introduction to BMW
    • EWS immobilizer
    • CAS immobilizer
    • FEM and BDC immobilizer
    • BDC2 (G-chassis)
  9. 09Mercedes-Benz4 lessons
    • Introduction to Mercedes-Benz
    • FBS1 flip keys
    • FBS2 and FBS3 Fobik keys
    • FBS4 (dealer-only keys)
  10. 10Volkswagen and Audi9 lessons
    • Introduction to VAG
    • IMMO 1 and 2
    • IMMO 3 and 4
    • IMMO 5 and MQB
    • KESSY
    • Audi RB4 and RB8 clusters
    • Audi BCM2
    • Audi MLB
    • VAG cheat sheet, explained
  11. 11Tips and tricks5 lessons
    • Problem vehicles and the risks
    • Honda ignition rebuilds
    • Brand-specific tips
    • OEM tools and software
    • Setting up your van
  12. 12The business side9 lessons
    • Do I need a licence?
    • Mobile or brick and mortar
    • Buying tools
    • Suppliers
    • Insurance and protection
    • Invoicing software and CRM
    • Inventory management
    • Pricing
    • Important resources
  13. 13Marketing and growth5 lessons
    • Setting up your brand
    • Deciding which services to offer
    • Finding clients
    • Reviews and lasting relationships
    • Once you're established
  14. +Bonus: real jobs, filmed in the bay10+ videos
    • Volvo XC90 all keys lost IM608 Pro II, EEPROM
    • Hyundai Kona flip key AutoProPAD G2 Turbo
    • Hyundai Elantra smart key Three tools compared
    • Jeep Compass all keys lost PIN code
    • Ford Fusion smart key Alarm lockout
    • RAM Fobik Add a key
    • Audi S5 VVDI2 over OBD
    • Range Rover Sport CEM EEPROM
    • Mitsubishi RVR all keys lost IM608
    • Lock picking 101 Basics

The tools you'll see used

The course is filmed with the equipment a working shop uses. You don't need all of it on day one, and Module 12 shows you how to buy in the right order.

Xhorse Key Tool Max reading a flip key

Key programmers

Autel IM608 Pro II, AutoProPAD, Xhorse Key Tool Max and VVDI, and ABRITES, with the jobs each one is good at.

Key machine screen showing the cut code for a Chevrolet Uplander blade

Key cutting machines

Cutting from a code, reading cut depths, and checking the finished blade before it goes in the car.

CarDAQ-Plus 3 and a J2534 interface in a case

Dealer-level access

J2534 interfaces and OEM software for the cars aftermarket programmers can't reach.

EEPROM programmer connected to a board on the bench beside isopropyl alcohol

EEPROM bench work

Reading and writing chips when the module has to come out of the car.

HU101 key blades

Blade profiles

Telling blades apart, from HU101 to Nissan, and decoding a lock with a Lishi when there's no key and no code.

Ignition cylinder removed from its housing and switch

Ignition and lock service

Pulling cylinders, ignition rebuilds, and the Honda housings that wear out.

Brand deep dives

See what each module covers

The parts nobody else tells you about

Key work has real risks. The course is upfront about them, because a bricked module costs more than the job pays.

Some jobs can brick a module

Low battery voltage, the wrong procedure or a failed EEPROM write can leave a car that won't start. Every risky step is flagged, with the checks to do first and the cars to walk away from.

Proof of ownership, every time

Module 1 covers liability and how to verify that the person asking for a key owns the car. It protects you, your shop and the vehicle owner.

When to say no

Lesson 11.1 covers problem vehicles: the ones where the risk outweighs the ticket, and how to tell a customer no.

Enroll

Get the whole course for one price.

One payment, lifetime access, every new lesson as it's added. If you later book a hands-on bootcamp, what you paid for the course comes off the bootcamp price.

$497 $297 USD, one time

Launch price until January 15, 2027

  • All 13 modules and 69 lessons
  • Quizzes, module tests and a certificate you earn
  • 6 months free in the graduates’ WhatsApp group
  • Every real job video
  • Lifetime access and updates
  • Full credit toward a hands-on bootcamp
  • 14-day refund if it isn't for you
Buy the course

Secure checkout. Taxes may apply. See the terms of sale.

Course questions

All questions

How long does the course take?

Most people work through it over a few weeks, a module or two at a time. There's no deadline, and you keep access for life.

Do I have to buy tools before I start?

No. Watch Modules 1 to 3 first. You'll understand what each tool does before you spend money, and Module 12 covers buying in the right order.

Which vehicles does it cover?

The fundamentals apply to most cars and trucks on the road. Brand modules go deep on BMW, Mercedes-Benz, Volkswagen and Audi, and the job videos cover Hyundai, Jeep, RAM, Ford, Volvo, Land Rover, Mitsubishi and more.

Will I get a certificate?

Yes. Pass all 13 module tests with 80% or better and you earn a Northkey Academy certificate of completion listing your hours of instruction.

Can I ask questions?

Yes. Email us any time. Students who book a bootcamp or on-site training get hands-on help as well.