Home / Online course / Mercedes-Benz
Mercedes-Benz key programming course
Mercedes keys, done on the bench.
Mercedes security revolves around FBS, the vehicle authorization system, and the electronic ignition switch your Fobik goes into. Module 9 of the course covers every generation, the tools that work, and the one system you should walk away from.
FBS1 to FBS4, in plain terms
Each generation sped up the car's data networks and tightened security. The generation decides whether the job takes an hour or can't be done outside the dealer.
- FBS1 (mid-1990s)The first electronic immobilizer, with bladed flip keys. Easy chips, tricky remotes, and the reason the KR55 is worth a look if you see Sprinters.
- FBS2 (late 1990s)Brought the transmission and other modules into the security network. Infrared Fobik keys.
- FBS3 (mid-2000s)Stronger security again. The bread and butter of aftermarket Mercedes work, done with the Xhorse VVDI MB and the EIS on the bench.
- FBS4 (about 2014 on)Strong encryption with a link to Mercedes servers. Dealer software only. If it's FBS4, pass and refer the customer to the dealer.
From the course
The tips that save hours on Mercedes jobs
- Work on the bench. Pulling the EIS takes a little more work, but it usually saves time on the password calculation.
- Dealer keys won't work. Mercedes keys from the dealer come pre-programmed to the car, and Mercedes doesn't sell blank factory keys.
- Know your Keyless Go. On pre-2011 Keyless Go cars with two-battery keys, an aftermarket key still starts the car by turning it, but push-start and proximity handles need a dealer key. Tell the customer before you start.
- Frequency is a setting. Xhorse keys run 315 MHz or 433 MHz, set in the VVDI MB or with a small board change.
- Check the chassis code, not just the year. Early FBS4 keys look identical to FBS3 keys, and a sedan can be FBS4 while the coupe of the same year is FBS3. Research anything 2013 or newer before you quote.
What Module 9 covers
- Introduction to Mercedes-Benz: the FBS generations, the EIS, and the tools (MBE KR55, Xhorse VVDI MB, and where the IM608 fits).
- FBS1 flip keys: early bladed keys and Sprinter work.
- FBS2 and FBS3 Fobik keys: how infrared keys work, and ten tips that save hours.
- FBS4: how to spot it before you take a job you can't finish.
Mercedes key programming questions
What tool do I need to program Mercedes keys?
For FBS2 and FBS3 Fobik cars, the Xhorse VVDI MB with its EIS cables and cradles does almost every job. The MBE KR55 is the only aftermarket tool that programs both the remote and the transponder on early flip-key Mercedes and the Dodge-badged Sprinter. The course explains when each one earns its place.
Can locksmiths program FBS4 Mercedes keys?
Not today. FBS4 key programming runs through Mercedes dealer software, which isn't available to locksmiths for this. The course shows how to identify FBS4 by chassis code so you can refer the customer instead of losing a day.
Why won't a key bought from the Mercedes dealer program?
Mercedes dealer keys are made for one specific car and arrive pre-programmed. Mercedes doesn't sell blank factory keys, so aftermarket work uses Xhorse or similar keys.
Is the Mercedes module sold on its own?
No. It's part of the complete Key Programming course, which covers the fundamentals first: transponders, blades, remotes and EEPROM work.
The full course
Every brand module. One price.
The BMW, Mercedes-Benz and VW/Audi modules are part of the complete Key Programming course: 13 modules and 69 lessons, from your first key blank to bench work on European modules. Lifetime access and every new lesson as it's added.
Launch price until January 15, 2027
- All 13 modules and 69 lessons
- BMW, Mercedes-Benz and VW/Audi modules
- Real job videos filmed in the bay
- Quizzes, module tests and a certificate
- 14-day refund if it isn't for you
Secure checkout. See every lesson first.